Table of Contents
Advertisement
MAC Address Filter
Allow access
by ...
Set Stations
Button
WiFi Protect Setup
Enable WPS
AP PIN Code
Input Client PIN
Code
WDS
Enable WDS
MAC Address
List
Use this feature to determine which Wireless stations can use the
Access Point. The options are:
•
All Wireless Stations - All wireless stations can use the access
point, provided they have the correct SSID and security settings.
•
Trusted Wireless stations only - Only wireless stations you
designate as "Trusted" can use the Access Point, even if they have
the correct SSID and security settings.
This feature uses the MAC address to identify Wireless stations.
The MAC address is a low-level network identifier which is
unique to each PC or network device.
To define the trusted wireless stations, use the "Set Stations" but-
ton.
Click this button to manage the trusted PC database.
Enable this if you want to use Wireless WPS function.
Use the default displayed value or click the Regenerate button to have
the new pin code in the field.
Enter the client's PIN code in the field and click OK to add the client
device.
This feature allows you to make a completely wireless network by
using multiple access points without connecting them with a wire
LAN.
In order to make the WDS working successfully, the access point must
use the same channel, SSID, as well as the wireless encryption method.
Enter the MAC address(es) of the AP(s) into the fields to allow the
following access points to be connected to the wireless router.
Advertisement
Table of Contents
