Datalogic Joya Touch A6 HC User Manual page 28

Battery
Maintenance LED (Red LED)
Blink red, 3 quick pulses
Blink red, 4 quick pulses
Blink red, 5 quick pulses
Blink red, 6 quick pulses
Solid red
For further information on the Joya Touch Single Slot Dock
Locking, refer to the Single Slot Dock Locking Quick Start
Guide, included in the dock's box.
NOTE
20
LED
- Continued
FOD (Foreign Object Detection). It's a WLC
error related to metallic parts between
transmitter and receiver coils. The power
transfer is suspended. Solution: remove
the device from the cradle, then remove the
metallic part causing the problem.
EOC (end of charge) timeout error. The WLC
EOC signal has been kept enabled by the
terminal for too much time. Typically, it is
caused by a bug in the terminal firmware.
The power transfer is disabled.
WLC generic error. The WLC system seems
unstable and unable to setup a stable
power transfer within a reasonable time.
The power transfer is suspended. Solution:
try to extract the device from the cradle
and to re-insert it again.
Device charging error.
Firmware upgrade.
Status
JOYA™ TOUCH A6