Datalogic Joya Touch A6 HC User Manual page 154

Data Capture
3. Center the symbol in any orientation within the aiming pattern.
Ensure the entire symbol is within the rectangular area formed
by the brackets in the aiming pattern, then either wait for the
timeout or release the Scan Key to capture the image. A red beam
illuminates the symbol, which is captured and decoded.
4.
If the scan has been successful:
• If enabled, the good read LED turns on (see
page 51
146
Linear Bar Code
and Led Notifications on page
LED Indicators on
62).
JOYA™ TOUCH A6