Finishing Your Workout - Horizon Fitness 7.8AT Owner's Manual

TO RESET THE CONSOLE
Hold STOP key for 3 seconds.

FINISHING YOUR WORKOUT

When your workout is complete, the unit will beep. Your workout information will stay displayed on the console for 30 seconds and then reset.
TO RESET THE LUBE BELT WARNING
The treadmill will flash "LUBE BELT" reminder every 150 mi. After lubricating belt, reset warning by holding down STOP and PLAY/PAUSE
buttons for 5 seconds.
BLUETOOTH HEART RATE MONITORING
The 7.8AT is equipped with multi-channel Bluetooth which enables you to wirelessly connect compatible Bluetooth heart rate monitoring
devices to this treadmill. You will need to ensure that your wireless heart rate monitoring device is Bluetooth 4.0 compatible and is also "open"
to sharing data. Non-"open" or "closed" devices typically only share data with their proprietary apps. The 7.8AT needs an "open" device to
receive data from the device. You may need to consult with your device's owner's manual or the manufacturer to confirm if it is an open device.
Pair the receiver to the app and the console will receive the information from the tablet. To use the Bluetooth HR monitor without a tablet,
press and hold the Bluetooth button to enable the console to communicate with the receiver. When paired with the Bluetooth HR monitor
the console will not pair with a tablet. To enable tablet communication press and hold the Bluetooth button for 5 seconds or reset power.
USING YOUR MUSIC DEVICE
The 7.8AT treadmill will connect and stream music form your compatible music device. This includes many smart phones and traditional mp3
players.
Your 7.8AT comes equipped with Bluetooth speakers. Bluetooth compatible devices can stream music wirelessly from your device to the
speakers. You can also connect your music device via an audio cable and stream music through the speakers. Instructions for both types of
31
audio connection are detailed below.