Horizon Fitness 7.8AT Owner's Manual page 12

ASSEMBLY STEP 2
PART TYPE
F ARC WASHER
G
SHORT BOLT
H LONG BOLT
F
G
H
4
12
HARDWARE FOR STEP 2
DESCRIPTION
8.2x18x1.5T
M8x1.25Px15L
M8x1.25Px70L
6
2
7
4
2.1 Open HARDWARE FOR STEP 2.
QTY
2.2 Have someone help hold the console while attaching
the CONSOLE CABLE (2). Use the lead wire to
4
carefully pull the CONSOLE CABLE (2) out of the
2
RIGHT CONSOLE MAST (4). Attach the CONSOLE
2
CABLE (2) from the CONSOLE (6) to the CONSOLE
CABLE (2) from the top of the RIGHT UPRIGHT MAST
(4). Detach and discard the lead wire.
2.3 Carefully slide the CONSOLE (6) onto the
ATTACHMENT BRACKETS (7) being careful not to
pinch the CONSOLE CABLE (2). Align the holes on the
bottom side of the CONSOLE (6) with the holes on the
ATTACHMENT BRACKETS (7).
2.4 Attach the CONSOLE (6) to the ATTACHMENT
BRACKETS (7) by first placing ARC WASHERS (F)
onto BOLTS (G) AND (H) as illustrated. Insert SHORT
BOLTS (G) into the top hole of the ATTACHMENT
BRACKET (7) and LONG BOLTS (H) into the bottom
hole.
2.5 Repeat STEP 2.4 for the opposite side.
F G H