Manual Strobe Exposure via Sync Cord
External strobes may be triggered by the camera by using a
coordinating electrical sync cord. Sync cords are available for Ikelite,
INON, SEA&SEA, and Retra strobes.
Manual Strobe Exposure via Fiber Optic Cord
The optional Manual Fiber Optic Transmitter allows the triggering of
most fiber optic compatible strobes.
•
Manual Fiber Optic Transmitter # 44700
•
Fiber Optic Cord # 4501
TTL Strobe Exposure
The optional DL5 DS Link TTL Converter can be programmed to the
camera's specific TTL protocol and supports both first curtain and rear
curtain sync up to the camera's maximum flash sync speed. Exposure
compensation can be used added or subtracted in the camera. A push
button and indicator light on the side of the converter make it simple to
switch back and forth between TTL and manual exposure underwater.
•
DL5 DS Link Canon TTL Converter CT1 Canon TTL Hotshoe Kit #
46075
•
Single Sync Cord # 45151 or Dual Sync Cord # 45152
Getting in the Water
Final Check
1. Re-check the rear o-ring seal. The seal should form an even, solid
line visible through the back of the housing.
2. Turn on the camera and check all control functions.
3. Make sure the camera can take a photo.
19