Usage; General Information - HTC 500 Manual

Usage

4. Usage

4.1. General Information

The following section describes how to change tools and how to
operate the grinding machine. This section does not deal with the
technical aspects of grinding, such as selection of grinding tools,
etc. For the choice of tools, see HTC's Product Catalogue under the
Grinding Guide tab.
Warning!
The machine may only be used or repaired by personnel who have
received the requisite theoretical and practical training and who
have read the user manual.
Warning!
Never use the machine in an environment with a risk of explosion
or fire. Familiarise yourself with the fire-protection instructions
for the working area and follow them.
Warning!
Secure the area around the working area. No unauthorised
persons should be allowed within a 15-metre radius of the
machine. If a loose object were to catch under the grinding head,
this could be flung out and cause personal injury.
Warning!
Use protective equipment such as safety shoes, safety goggles,
protective gloves, breathing mask and ear muffs.
Warning!
The machine must only be started with the grinding head down.
The rotating disc must be touching the floor and the correct tool
must be fitted.
14
HTC 500
1.0