Description Of Controls - Control Panel - HTC 500 Manual

Machine Description
3.2. Description of Controls – Control
Panel
The picture below shows the machine's control panel:
6
5
4
Figure 3-3 Control panel
12
DUTY EM-STOP
RESET SPEED
REW 0 FWD OFF ON
EM-STOP - Emergency stop switch: In an
1.
emergency, press the switch to cut the power
to the machine.
2. SPEED - Rotational speed: Regulates the
rotational speed of the machine's grinding
discs.
ON/OFF - Start/stop the machine's functions:
3.
Turn the knob to "ON", to activate the
machine's functions and to prepare for
starting. Turn the knob to "OFF", to switch off
the machine's functions.
4. REW/FWD- Start/stop the grinding discs'
rotation and direction of rotation. Turn the
knob to "0", to stop the rotation.
RESET -Resetting the electronics: If the
5.
machine experiences an error, it can be
reset by pressing and holding the button
in for two seconds. Any error code is
HTC 500
1
2
3
1.0