Lexmark MX822adxe User Manual page 108

Understanding the printer menus
Menu item
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Offset Pages
None*
Between Copies
Between Jobs
Staple
Off*
1 staple, top left corner
2 staples, left
1 staple, top right corner
2 staples, top
1 staple, bottom left corner
2 staples, bottom
1 staple, bottom right corner
2 staples, right
Punch
Off*
2 holes
3 holes
"Copy from" Size
"Copy to" Source
Tray [x] (1*)
Multipurpose Feeder
Auto Size Match
Darkness
1 to 9 (5*)
Number of Copies
1–9999 (1*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Print multiple copies in sequence.
Offset the output of each print job or each copy of a print job.
Notes:
•
Between Copies offsets each copy of a print job if Collate is set to On
[1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages
are offset, such as all page 1s and all page 2s.
•
Between Jobs sets the same offset position for the entire print job
regardless of the number of copies printed.
•
This menu item appears only when a staple finisher is installed.
Specify the staple position for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the punch mode for all print jobs.
Note: This menu item appears only when a staple finisher is installed.
Set the paper size of the original document.
Note: Letter is the U.S. factory default setting. A4 is the international factory
default setting.
Specify the paper source for the copy job.
Adjust the darkness of the scanned image.
Specify the number of copies.
108