Table of Contents
Advertisement
5.2
Operation
•
Przed pier wsz ym uż yciem wycz yś cić urządz eni e i wypos ażenie zgodni e z e ws kazówkami z awartymi w pu nkcie 6 „Cz yszczen ie" . M ake s ure no water enters elec tric ins tall ati on and connection box. N as tępni e dokładni e os usz yć urz ądzenie i elementy wyposaż enia.
•
Setzen Sie di e Boden-Abdec kung in das Bec ken ei n. T he c over acts as a spac er between the heating element and l eft- over food tray.
•
Carefull y i nser t the c onnection box with the heati ng element at the bac k edge of the applianc e. A pin in bottom par t of the c onnecti on box must enter a hol e i n t he mai n applianc e. This way the connec tion box is properly mounted.
Tips for the User
•
Shelves may be positioned at various heights. Arrange them adequately to the
size of beverage and food product containers, so that the inner space of the
appliance is used optimally.
•
Beverages and food products in suitable containers should be arranged on the
shelves so that proper distances between them allow for sufficient air circulation
inside the appliance. Insufficient distances hinder the cooling effect.
•
Do not place warm food dishes in the appliance; cool them down to ambient
temperature first.
•
To limit loss of cold air minimize the opening time of door during operation.
•
If possible, in the event of a sudden power failure, avoid opening the doors of
the appliance in order to avoid loss of cool air.
Preparation of the Appliance
1. Prior to the first use thoroughly clean the appliance and its components
according to the instructions included in section 6 'Cleaning'.
EN
2. To end with, dry the appliance and accessories thoroughly.
3. At a required height, place supports on guide rails and insert shelves.
4. Close the appliance door.
5. Plug the appliance into a suitable single socket.
6. Switch the appliance on with the ON/OFF button located at the right panel of the
appliance.
The appliance will be cooled down to the factory pre-set temperature.
The digital display shows current temperature inside the appliance.
The LED cooling indicator will come on, and it will be lit throughout the entire
cooling process.
7. Beverages and food products should be placed in the appliance only when it
reaches the right temperature.
8. If needed, the temperature may be altered with digital temperature control
regulator buttons.
14 / 22
Installation and operation
700336
Advertisement
Table of Contents
