Table of Contents
Advertisement
Installation and operation
•
Do not position the appliance in high humidity locations. Air relative humidity in
the place of installation should not exceed 70 %. Excessive humidity may hinder
the refrigerating efficiency of the appliance.
•
Do not block nor cover the ventilation openings nor air inlet or air outlet of the
appliance.
•
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
•
The appliance requir es s ufficient airflow for pr oper operation. Ass ure a mini mum later al cl ear anc e of the appli ance of 10 c m.
•
Die Öffnungen am Gerät niemals abdec ken oder bl oc ki eren.
•
Place the appliance so that sufficient air circulation is ensured. Do not block nor
cover ventilation openings in the rear wall of the appliance.
•
Leave at least 10 cm clearance from walls and other objects.
•
Lock the casters with the parking brake when the appliance is set in a suitable
location.
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
•
After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
700336
EN
13 / 22
Advertisement
Table of Contents
