Rejection Limits - Atlas Copco XAS 185 KD T4F HOP Instruction Manual

REJECTION LIMITS

Designation
Minimum pressure valve - minimum closing pressure
Minimum pressure valve - maximum closing pressure
Safety valve - maximum opening pressure
Safety valve - minimum opening pressure
Vessel pressure at no load, minimum
Vessel pressure at no load, maximum
Engine shaft speed at full load, minimum
Engine shaft speed at full load, maximum
Engine shaft speed at unload, minimum
Engine shaft speed at unload, maximum
Minimum Free air delivery
Test pressure
Unit All units
NA
NA
(psi) 175.1
(psi) 164.9
(psi) 120
(psi) 135
(rpm) 2700
(rpm) 2700
(rpm) 1800
(rpm) 1800
(cfm) 185
psi(g) 100
- 63 -
1) At reference conditions, if applicable, and at normal shaft speed unless otherwise
stated.
2) Free Air Delivery (volume flow rate) is measured according to ISO 1217 ed.4 2009
annex D
Tolerance:
• +/- 5% 25 l/s (53 cfm) < FAD < 250 l/s (530 cfm)
• +/- 4% 250 l/s (530 cfm) < FAD
The international standard ISO 1217 corresponds to following national standards:
• American ANSI PTC9
• British BSI 1571 part 1
• German DIN 1645 Part 1
• Swedish SS-ISO 1217
3) Air required for engine and compressor cooling, combustion and for compression.
4) with filter change
5) Gross power guaranteed within +/- 5% at SAE J1668 and ISO 3046 conditions:
- 77°F air inlet temperature
- 29.31 in. Hg barometer
- 104°F fuel inlet temperature
- 0.853 fuel specific gravity @ 60°F
6) Measured in accordance with ISO 2151 under free field conditions at 7m distance