Supermicro SuperServer E300-9A-4CN10P User Manual page 65

iSCSI Configuration

iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format.
Once the name of the iSCSI Initiator is entered into the system, configure the proper settings
for the following items.

Add an Attempt

Delete Attempts

Change Attempt Order
Intel® I210 Gigabit Fiber Network Connection - 0C:C4:7A:...

Intel® I210 Gigabit Fiber Network Connection - 0C:C4:7A:...

Intel® I350 Gigabit Network Connection - 0C:C4:7A:FC:F2:BF

Intel® I350 Gigabit Network Connection - 0C:C4:7A:FC:F2:BF

Intel® I350 Gigabit Network Connection - 0C:C4:7A:FC:F2:C0

Intel® I350 Gigabit Network Connection - 0C:C4:7A:FC:F2:C1

Intel® Ethernet Connection X553 1GbE - 0C:C4:7A:FC:F2:C2

Intel® Ethernet Connection X553 1GbE - 0C:C4:7A:FC:F2:C3

Intel® Ethernet Connection X553 1GbE - 0C:C4:7A:FC:F2:C4

Intel® Ethernet Connection X553 1GbE - 0C:C4:7A:FC:F2:C5

These features display the following information:
NIC Configuration (Dependent on the LAN chipset)
Link Speed
Use this feature to change the link speed and duplex for the current port. The options are
Auto Negotiated, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.
SFP LAN
This feature is grayed out and cannot be selected.
Wake On LAN
Select enabled to wake the system with a magic packet. The options are Enabled and
Disabled.
Blink LEDs
This feature allows the user to specify the duration for LEDs to blink. The range is from 0 ~
15 seconds. The default setting is 0.
65
Chapter 5 BIOS