Supermicro SuperServer E300-9A-4CN10P User Manual page 46

SuperServer E300-9A-4CN10P User's Manual
Power Configuration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive for more
than 5 minutes. The options are Disabled and Enabled.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override for the user to power off the system after pressing and holding the power
button for 4 seconds or longer. Select Instant Off to instantly power off the system as soon
as the user presses the power button. The options are 4 Seconds Override and Instant Off.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay Off, Power On, and Last State.
CPU Configuration

The following CPU information will display:
•
Displays the CPU model
•
Processor ID
•
Microcode Revision
•
Processor Frequency
•
CPU BCLK Frequency
•
L1 Cache RAM
•
L2 Cache RAM
EIST (GV3)
EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically adjust
processor voltage and core frequency to reduce power consumption and heat dissipation.
The options are Disable and Enable.
BIOS Request Frequency
Use this feature to instruct how much frequency will be delivered to the processor. The options
are Disable and Enable.
46