Table of Contents
Related Manuals for Sleipner SRP-L130
Summary of Contents for Sleipner SRP-L130
- Page 1 Installation Guide For Pro Electric Retractable Thruster Models SRP-L&V130, SRP-L&V170, SRP-V210, SRP-V250 DOCUMENT ID: SLEIPNER AS 5928 REVISION: P.O. Box 519 DATE: N-1612 Fredrikstad 2021 Norway LANGUAGE: www.sleipnergroup.com...
-
Page 2: Table Of Contents
Product Spare Parts and Additional Resources ....24 Warranty statement ............24 DECLARATION OF CONFORMITY MC_0020 Sleipner Motor AS P.O. Box 519, Arne Svendsensgt. 6-8 N-1612 Fredrikstad, Norway Declare that this product with accompanying standard control systems complies with the... -
Page 3: Planning Installation Considerations And Precautions
Before installation, it is important that the installer reads this guide to ensure necessary acquaintance with the product. The recommendations made in this manual are guidelines ONLY, and Sleipner Motor AS (Sleipner) strongly recommend that before installation, advice is obtained from a naval architect familiar with the particular vessel and regulations/ classifi cations. -
Page 4: Thruster Measurements
MG_0141 Thruster Measurements MC_0151 SRL *130 SRL *130 SRL *170 Measurement Measurement description code mm inch mm inch mm inch Motor supplementary measurement (Length) 10.39 10.59 11.38 SRF flange & motor housing length 27.09 27.09 27.09 Motor supplementary measurement (Height) 0.91 0.91 1.73... -
Page 5: Thruster Specifications
- The electric thermal cut-off switch in electro motor protects against overheating (auto-reset when electro motor cools down). - Flexible coupling between electro-motor and drive shaft protects electro motor and gear system if propeller jams. - Original Sleipner panels shut off automatically 6 minutes after last use. - Original Sleipner panels use child-safe double ON buttons. -
Page 6: Positioning Of The Retract Thruster
Stern Installation Thruster moved to avoid conflict Thruster moved to avoid conflict Bow Installation WATERLINE Minimum tunnel depth Hatch opens towards the direction of travel SR 80 & 100 = 185mm SR 130 & 210 = 250mm SR 250 & 300 = 300mm MG_0121 Positioning of the Retract thruster MC_0067... -
Page 7: Thruster Installation Considerations And Precautions
If installing S-link products DO NOT connect any other control equipment to the S-link controlled products except Sleipner original S-link products or via a Sleipner supplied interface product made for interfacing with other controls. Any attempt to directly control or at all connect into the S-link control system without the designated and approved interface will render all warranties and responsibilities for the complete line of Sleipner products connected void and null. -
Page 8: Marking And Trimming Of Srf Flange
Ensure to have a minimum of 100mm Mark using space around the internal surface Thrusters can be positioned outside thruster installation to of the boat centre line, however, all have service access positioning measures must be considered Mark the centre line Ensure SRF of the hull keel flange is centred... -
Page 9: Installation Pre-Check
Controller Controller Apply silicon to corner areas (FUSE) SETTINGS 1 2 3 4 DOWN FAULT STATUS From power supply Remove wooden installation part Conflict with hatch hatch opens and hull without conflict Hatch does not close Hatch closed with with pressure pressure... -
Page 10: Required Modifications After Pre-Check
Raise SRF flange on stern end Conflict with hatch hatch opens and hull without conflict Use wedge to prop the SRF flange to required height hatch opens without conflict Hatch closed with pressure MG_0133 Required Modifi cations After Pre-check MC_0068 ! Please refer to the graphic for special considerations relating to your model ! To increase the space between the hatch and the hull the entire SRF flange and motor must be raised at the stern end. -
Page 11: Srf Flange Installation
Inside and outside moulding surfaces must be ground to remove coating/ material to achieve correct adhesion preparations for moulding. Fill all gaps with Expoxy filler or equivalent, with thruster case resting on Apply Epoxy filer or equivalent for the SRF flange. Grind and smoothen bonding between hull and SRF flange surfaces after cutting. -
Page 12: Motor House Installation
IMPORTANT Do not position support on the motor cap. MG_0122 Motor House Installation MC_0068 ! Please refer to the graphic for special considerations relating to your model ! Apply MS Polymer or equivalent on SRF flange top surface to seal and avoid water leakage. (NB: Ensure that glue is compatible with SRF and thruster case materials.) Place the upper thruster Housing down on the SRF flange. -
Page 13: Hatch Installation
Pin bolts with sharp Drill holes ends to punch mark the hole pattern to hatch Tap/ press to get punch marks of hole pattern Inside of hatch Countersink all 4 holes Outside of hatch Apply a layer of aluminium or duct Ensure to adjust the tape on hatch hatch bolts so they do... -
Page 14: Motor To House Installation
Install the relevant motor and other electronics according to electrical instructions in the manual Bolt tightening force (4x) 33 Nm (24 lb/ft) MG_0107 Motor to House Installation MC_0068 ! Please refer to the graphic for special considerations relating to your model ! Install the motor onto the motor bracket ensuring both the couplings and the drive shafts have locked together. -
Page 15: Thruster Electrical Installation
IMPORTANT The Proportional Power Controller is a bulkhead (wall) mounted unit and must be installed in a dry and well-ventilated compartment. The unit also requires a 200mm minimum head clearance, 150mm minimum bottom clearance and a 100mm 200mm minimum clearance surrounding its remaining outer casing. -
Page 16: Electrical Specifications
Electrical Specifi cations MC_0044 SRP L&V 130 & 170 & 210 & 250 5928 2021... -
Page 17: Control Panel Cable Installation
• Sleipner on/off equipment it is entirely “plug & play” and require no additional confi guration setup. See the Control panel manual for more information. SRP L&V 130 & 170 & 210 & 250... -
Page 18: S-Link Planning & Precautions
- Round, compact and waterproof plugs with unique keying and colour coding to avoid faulty hookup. - An unlimited number of commands or information transfer on a single cable. - Proprietary Sleipner commands but built 100% on NMEA 2000 standard. Routing the Backbone: Keep routing backbone spur cables to a minimum. -
Page 19: Technical Wiring Diagram
Technical Wiring Diagram MG_0102 SRP L&V 130 & 170 & 210 & 250 5928 2021... - Page 20 Technical Wiring Diagram MG_0138 SRP L&V 130 & 170 & 210 & 250 5928 2021...
-
Page 21: Check Drive Shaft Alignment
Actuator arm and bearing Controller (FUSE) SETTINGS 1 2 3 4 DOWN FAULT STATUS Align pointer on lever arm with red mark on bearing MG_0108 Check drive shaft alignment MC_0069 IMPORTANT Before the thruster motor is operated, check the drive shaft alignment is completely straight when it reaches the end position form the control panel operation: 1) Connect power to thruster and S-link system. -
Page 22: Control Panel Installation
4x SCREWS Ø 4.5 mm Ø 4.5 mm 75.7 mm 58 mm 67 mm GASKET Ø 4.5 mm Ø 4.5 mm Ø 4.5 mm External alarm / buzzer connection (S-link) Supply + 12V / 24V DC Internal fuse / relay External alarm buzzer 12V / 24V DC - max 0,5A MG_0063... -
Page 23: Checklist For Dc And Ip Thrusters
Pre-delivery Checklist MC_0033 ..The bolts holding the gear house and motor bracket together are tightened correctly... The bolts holding the motor to its bracket are tightened correctly... All electrical connections are clean, dry and tight, and the correct cable, fuse and main switch size. -
Page 24: Service And Support
10. This warranty gives you specific legal rights, and you may also have other rights which vary from country to country. Patents MC_0024 At Sleipner we continually reinvest to develop and offer the latest technology in marine advancements. To see the many unique designs we have patented visit our website www.sleipnergroup.com/patents SRP L&V 130 & 170 & 210 & 250... - Page 25 Notes MC_0037 ..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................SRP L&V 130 & 170 & 210 & 250 5928 2021...
- Page 26 Notes MC_0037 ..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................SRP L&V 130 & 170 & 210 & 250 5928 2021...
- Page 27 Notes MC_0037 ..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................SRP L&V 130 & 170 & 210 & 250 5928 2021...
- Page 28 © Copyright Sleipner Motor AS, 2021 The information given in the document was correct at the time it was published. However, Sleipner Motor AS can not accept liability for any inaccuracies or omissions it may contain. Continuous product improvement may change the product specifi...
Need help?
Do you have a question about the SRP-L130 and is the answer not in the manual?
Questions and answers