Page 1
User Manual For Retract Thruster Models SRP & SRP-IP Electric DOCUMENT ID: SLEIPNER GROUP 5923 REVISION: P.O. Box 519 DATE: N-1612 Fredrikstad 2022 Norway LANGUAGE: www.sleipnergroup.com To download your language go to www.sleipnergroup.com...
Failure to follow the considerations and precautions can cause serious injury, damage and will render all warranties given by Sleipner Motor as VOID. MC_0411 General Operation Considerations and Precautions Guidelines MC_0444 For the operation of thrusters MC_0418 Never use thrusters when close to objects, persons or animals in the water. The thruster will draw objects into the tunnel and the rotating propellers.
! Please refer to the graphic for special considerations relating to your model ! The following is an operation guide to ALL Sleipner control products. Ensure to familiarise yourself with the functionality and operation of your specifi c control device.
Proportional Control Panel Activating the stern thruster Activating the bow thruster Using your control device/ panel Press the button or move the Using your control device/ panel Press the button or move the joystick in the direction you intend to turn the boat. Ensure to use joystick in the direction you intend to turn the boat.
Maintenance MC_0063 ! Please refer to the graphic for special considerations relating to your model ! As a part of the seasonal service of your Thruster perform these maintenance checks while the vessel is in these circumstances: In Water • The area around cables inside the boat are clean and dry.
Page 7
SR80 & SR100 Maintenance Check and re-lubricate Retract mechanism anode with waterproof grease if (Both sides) necessary Gear leg anode DO NOT apply anti-fouling (Both sides) DO NOT clean with chemicals, hot water or high-pressure water jet in this area. Check these areas for leaks MG_0480 SRP &...
Page 8
SR(V,L) Maintenance DO NOT apply anti-fouling DO NOT clean with chemicals, hot water or high-pressure water jet in this area. Retract Check and re-lubricate mechanism anode with waterproof grease if necessary Check annually rubber element and replace every 2nd year. (NB: SR300 does not have a rubber element) Gear leg anode...
Basic Troubleshooting MC_0013 Before seeking assistance from the website help desk from your Sleipner dealer/ distributor, please perform these tests. (NB: If you are unable to understand or perform these checks, you must consult a Sleipner distributor.) CHECK SOLUTION The motor runs, but there is no thrust Check propellers are fi...
Product Specifi cations MC_0487 Nominal Thrust for: Thrust at Maximum Product Power Weight Voltage 12V or 24V 10.5V or 21V Operation Time (12V) (24V) S2 motor at 2 - 3 min. duty cycle at 20°c (ambient temperature) 96 kg / 212 lbs 80 kg / 176 lbs 4.4kw / 6hp 31 kg / 68 lbs...
11. This warranty gives you specific legal rights, and you may also have other rights which vary from country to country. Patents MC_0024 At Sleipner we continually reinvest to develop and offer the latest technology in marine advancements. To see the many unique designs we have patented visit our website www.sleipnergroup.com/patents SRP & SRP-IP user manual...
Need help?
Do you have a question about the PRO SRP Series and is the answer not in the manual?
Questions and answers