Supervisor level
- Factory default setting:
The display switches off after 10 minutes.
-
On (30 min.) Not curr.prog.
The display will remain on while the programme is running, but will go out 30 minutes
after the end of the programme.
-
Logo (30 min.) Not curr.prog.
The display will remain on while the programme is running, but the logo will light up
30 minutes after the end of the programme.
On after 30 min.
-
The display will go out after 30 minutes.
"Machine" off status
In order to save energy, the tumble dryer will switch off automatically after the end of the
programme or if no further selection is made. This can be changed.
Changing this setting leads to increased energy consumption.
- Not switching off
- Factory setting: Switching off after 15 minutes
- Switching off after 20 minutes
- Switching off after 30 minutes
Delay start
The delay start (Timer) can be activated or deactivated.
- Factory setting: Off
- On
Memory
The tumble dryer saves the settings that were last selected for a drying programme
(drying level and/or Extras, or the duration for some programmes).
- Factory setting: Off
- On
Temperature unit
You can select the unit for the temperature display.
- Factory setting: °C
- °F
Weight unit
You can decide whether load quantities are displayed in "kg" or "lb".
- Factory setting: kg
- lb
46
On after 10 min.