Technical Data; Possible Voltage Variants; Peak-Load Negotiation (Optional); Condensate Drainage - Miele PDR 914 HP Installations Plan

Possible voltage variants

Supply voltage
Frequency
Power rating
Fuse rating (on site)
Minimum cross-section for connection cable
Cable gland

Peak-load negotiation (optional)

Supply voltage for control contacts
Minimum cross-section for connection cable
Miele recommends using a flexible connection cable with an additional isolation option to establish the connection. The isolator should
remain visible once the tumble dryer has been installed and must be freely accessible.

Condensate drainage

Condensate connector on machine side (external diameter)
The tumble dryer with heat pump operates according to the principle of condensation. The condensate that accumulates must be
drained away separately via a floor drain. The water can be routed to the floor drain via a hose or pipe pointing downwards.

Machine data

Machine width, total
Machine height, total
Machine depth, total
Net width of heat pump module
Net height of heat pump module
Net depth of heat pump module
Niche width
Recommended wall spacing (up to the front edge of the machine)
Minimum wall spacing (up to the back edge of the lid)
Packaging width
Packaging height
Packaging depth
Maximum gross volume
Maximum gross weight
Maximum net weight
Net weight of heat pump module
Max. floor load in operation
Drum diameter
Diameter of drum opening
Drum depth
Drum volume
Diameter of door opening
Maximum door opening angle
Emission sound pressure level
en - Technical data
Standard connection
3N AC 400 V
51 dB(A) re 20 µPa
50 Hz
4.9 kW
3×16 A
5×2.5 mm²
M25
AC 230 V
5×1,5 mm²
30 mm
906 mm
1400 mm
1232 mm
912 mm
1400 mm
426 mm
1250 mm
1700 mm
500 mm
1090 mm
1526 mm
1738 mm
2890.9 l
167.7 kg
156.4 kg
168.4 kg
1740 N
850 mm
520 mm
480 mm
250 l
520 mm
180°
21