Machine" Off Status; Delay Start; Memory; Temperature Unit - Miele PDR 914 Operating And Installation Instructions

Logo (10 min.) Not curr.prog.
-
The display will remain on during the programme sequence but the logo will light up
10 minutes after the end of the programme.
On after 10 min.
- Factory default:
The display is switched off after 10 minutes.
On (30 min.) Not curr.prog.
-
The display will remain on during the programme sequence but will go out 30 minutes
after the end of the programme.
Logo (30 min.) Not curr.prog.
-
The display will remain on during the programme sequence but the logo will light up
30 minutes after the end of the programme.
On after 30 min.
-
The display will go out after 30 minutes.

"Machine" off status

In order to save energy, the tumble dryer will switch off automatically after the end of the
programme or if no further selection is made. You can change this setting.
Changing this setting leads to increased energy consumption.
- No switch off
- Factory default: Switch off after 15 minutes
- Switch off after 20 minutes
- Switch off after 30 minutes

Delay start

The delay start (timer) can be activated or deactivated.
- Factory default: Off
- On

Memory

The tumble dryer saves the settings that were last selected for a drying programme (dry-
ing stage and/or extra option, or the duration for some programmes).
- Factory default: Off
- On

Temperature unit

You can select the unit for the temperature display.
- Factory default: °C
- °F

Weight unit

You can decide whether load quantities are displayed in "kg" or "lbs".
- Factory default: kg
Supervisor level
41