Part Identification Chart - NordicTrack RW900 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see
whether it has been preassembled. Extra parts may be included.
M4 x 16mm M4 x 19mm
Screw (107)–5 Screw (104)–8
M10 x 20mm M10 x 35mm M10 x 40mm
Screw (101)–2 Screw (100)–8 Screw (105)–1
M10 x 60mm Screw (103)–2 M10 x 65mm Screw (119)–1
M10 x 100mm Screw (102)–1
5