Part Identification Chart - NordicTrack COMMERCIAL 14.9 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see
whether it has been preassembled. Extra parts may be included.
M4 x 16mm
Screw (101)–21
M8 x 16mm
Washer (155)–4
M8 x 22mm M8 x 28mm
Washer (129)–2 Washer (97)–2
M8 x 13mm M8 x 20mm M8 x 20mm Flat M8 x 45mm Bolt
Screw (82)–4 Screw (95)–2 Head Screw (120)–2 (96)–4
M10 x 25mm M10 x 60mm Screw
Screw (92)–2 (90)–4
M10 x 115mm Screw
(104)–2
7