Table of Contents
Advertisement
Installation
Interior View
Interior view of boards and wiring connections
Input Wiring
NOTE:
The Local Management Ethernet Port (L) on the side of the Ubiquity Cloud Gateway is used only for local onsite
management of the QWL4.1 device. Optionally, this port can be configured as secondary Internet fail-over port (see
Appendix D: Configuring Local Management Port as a Fail-Over Port on page 40
COM Ports (RS-485 Network): Connect up to two RS-485 Networks to the inputs on Com Port panel or on the Serial Board
adjacent to the Gateway. (see
USB Ports 1 – 4: As an option, you can connect up to 64 RS-485 controller networks via the four USB ports on the side of
the Ubiquity Cloud Gateway, by using QD1010 USB-to-RS-485 converters (not included).
8
8
2800 Laura Lane • Middleton, WI 53562
RS-485 Controller Network Wiring & Setup on page
Digital Inputs
Analog Inputs
Optional RS-485
Input (TCSBus Only)
Pulse Meter Inputs
COM 2 RS-485
Inputs
COM 1 RS-485
Inputs
Ubiquity Cloud
Gateway Ports
Closeup of Ubiquity Cloud gateway ports
).
10).
|
800.288.9383
|
www.tcsbasys.com
Not Used
Not Used
USB
CABLE
Management Port
ETHERNET
CABLE
Not Used
Not Used
USB
CABLE
Not Available
Building Automation Systems
Advertisement
Table of Contents
