Table of Contents
Advertisement
Appendices
TCS Insight network tab
NOTE:
If the laptop does not detect the converter, you will need to install an FTDI driver. Click on the Help tab in the
Insight software and select Install FTDI Driver. Follow the installation instructions.
5. Select the new COM port and click on the Open Port button.
6. Click on the second Poll tab. This will cause the software to recognize the SLQ218 and SEQ100.
Second poll tab
7. Click on the SLQ218 icon to access the programming tabs. (See
8. After programming the SLQ218, click on the SEQ100 icon to access the programming tabs.
45
45
2800 Laura Lane • Middleton, WI 53562
Lighting/Pulse Meter Programming on page
|
800.288.9383
|
www.tcsbasys.com
24).
Building Automation Systems
Advertisement
Table of Contents
