Table of Contents
Advertisement
Appendices
Appendix E: Installing and Using TCS Insight Software
TCS Insight is a free software tool for the initial installation, programming, and verification of the lighting and pulse meter
modules built into the QWL4.1. It is meant to be used in those instances when you may not have access to Ubiquity Cloud.
You can download the software at https://www.ubiquitysystems.net/su/insight/TCS_Insight_Setup.zip.
In order to use TCS Insight software, you will need:
• Laptop PC running Windows 95 or later, with an available USB port
• USB A to B Cable
• RS-485 Cable
• QD1010-USB Converter (wired networks) OR QW1010a Converter (wireless networks)
Setup
1. Inside the QWL panel, disconnect the internal USB cable leading to the Panel Gateway. This will isolate the SLQ218
and pulse meter for polling.
USB cable to disconnect
2. Connect an RS-485 cable from the open port on the SLQ218/SEQ100 board to the QD1010-USB or QW1010a
converter
(See Input Wiring on page 8
3. Use a USB cable to connect the converter to the open USB port on the laptop. This will power the converter.
4. Launch Insight. The software should detect the converter and establish a new COM port (e.g., COM5).
44
44
for port location).
2800 Laura Lane • Middleton, WI 53562
|
800.288.9383
|
www.tcsbasys.com
Building Automation Systems
Advertisement
Table of Contents
