RACCEWAY E-MOPED User Manual page 8

5. FRONT COVER INSTALLATION WITH CONNECTOR CONNECTIONS
1. Replace the front cover that I removed in section 1.
2. Connect the disconnected electrical connectors. Orange wire with green and blue with yellow.
3. Check that the connection is correct. Open the seat section and connect the connector to the
battery and switch on the circuit breaker.
4. Turn the ignition key to start E-MOPED. Try triggering the lights, brakes and lights. lf the
connectors are not connected correctly, the signaling will not work. After testing the
functionality, turn off the ignition key. Never connect live connectors (always keep the
battery circuit breaker off).
5. Mount the front plastic cover to the E-MOPED body with eight screws.
6. PEDALS INSTALLA TION
Warning: Do not tighten by force, as the handles are made of aluminum alloy.
1. The right pedal (marked "R" on the pedal shaft) must be mounted on the crank on the right
and tightened clockwise.
2. The left pedal (marked with the symbol "L") is mounted on the crank on the left and tightened
firmly counterclockwise.
7