RACCEWAY E-MOPED User Manual page 6

1 O. Carefully remove the protective foil from the entire E-MOPED.
11. Unscrew the front plastic cover.
2. INSTALLATION HANDLEBAR
1. Unscrew the bolt with washer and nut from the steering column.
2. Attach the handlebar model to the steering column.
3. Connect the steering column from the front with the removed screw and washer.
On the other side, place the nut on the screw and tighten with a torque wrench.
3. INSTALLATION FRONT WHEEL
1. Place the center of the E-MOPED and prepare the front wheel with the shaft and the spacer
rollers. The shaft with rollers was removed in part no.6.
2. Pass the shaft through the left fork and insert the SMALL spacer roller into the inner space
between the fork and the brake disc.
on!
When changing the rollers, the wheel cannot be put
5