Displaying Maximum, 2/3 Of Maximum, Minimum Or Average Readings; Troubleshooting; Cleaning And Care - Parkside PWM A1 Operation And Safety Notes

˜ Displaying maximum, 2/3 of
maximum, minimum or average
readings
In measurement mode, press MAX/MIN
shows MAX
display
[ 3 ]
wind speed and the maximum temperature, which have
been recorded since you entered this mode (Fig . D) .
Press MAX/MIN
7 ] [
erased . The display
[ 3 ]
with two-thirds of the maximum wind speed and the
maximum temperature, which have been recorded since
you entered this mode .
Press MAX/MIN
[ 7 ]
erased . The display
3 ] [
the minimum wind speed and the minimum temperature,
which have been recorded since you entered this mode
(Fig . E) .
Press MAX/MIN
[ 7 ]
erased . The display
3 ] [
average wind speed and the average temperature, which
have been recorded since you entered this mode .
Press MAX/MIN
7 ] [
erased . The product returns to measurement mode .
12 GB
. The
[ 7 ]
together with the maximum
[ 14 ]
again . All recorded readings are
shows 2/3MAX
together
[ 14 ]
again . All recorded readings are
shows MIN
together with
14 ] [
again . All recorded readings are
shows AVG
together with the
14 ] [
again . All recorded readings are
˜ Troubleshooting
Error Possible causes/solutions
The measurement is
obviously too high Is
or low . If yes: Replace with new batteries .
The value in the
display is not Is
[ 3 ]
If yes: Briefly press HOLD
reacting .
The value in the
display is barely The batteries are low (see "Inserting/
[ 3 ]
visible . changing the batteries") .
Electrostatic discharges can lead to malfunctions . In the event
of such malfunctions, remove the batteries briefly and reinsert
them .
˜ Cleaning and care
Do not allow liquids to enter the product . Otherwise the
product may be damaged .
Do not use abrasive cleaning agents, cleaning alcohol or
other chemical solutions since these could damage the
housing or even impair operation .
Use a dry, lint-free cloth for cleaning .
The product is maintenance-free . No components need to
be maintained inside the product .
Before every use: Check the product for visible external
damage .
shown in the display
9 ] [
H
shown in the display
11 ] [
.
6 ] [
3 ] [
3 ] [