Intended Use; Scope Of Delivery; Description Of Parts - Parkside PWM A1 Operation And Safety Notes

˜ Intended use
This product is suitable for measuring wind speed and air
temperature . The wind speed can be displayed in 5 different
units (m/s, km/h, ft/min, knots, mph) . The temperature can be
displayed in °C or °F . The readings are displayed on an LCD
screen . The LCD screen features a backlight, which can be
switched on and off .
The product features the following functions:
Display of maximum, 2/3 of maximum, minimum or
average readings
Automatic power-off function
Hold function (freeze values on the display)
The product can only be used in a dry and dust-free
environment . The product is only intended for use in private
households, and not intended for commercial use .
The manufacturer accepts no liability for damages caused by
improper use .
˜ Scope of delivery
After unpacking the product, check if the delivery is complete
and if all parts are in good condition . Remove all packaging
materials before use .
Please contact customer service if parts are missing or
damaged .
1 x Anemometer
3 x Batteries (LR03/AAA)
1 x Instruction manual
˜ Description of parts
Before reading, unfold the page containing the illustrations and
familiarise yourself with all functions of the product .
(Fig . A, B, F)
Vane
1 ] [
Temperature sensor
2 ] [
Display
[ 3 ]
Button:
4 ] [
UNIT
Button:
5 ] [
Button:
6 ] [
HOLD
MAX/MIN (highest/lowest reading)
Button:
7 ] [
Indicator:
[ 8 ]
Indicator:
[ 9 ]
Wind speed display
[ 10 ]
H
Indicator:
11 ] [
Temperature display
[ 12 ]
SET
Indicator:
13 ] [
AVG
Indicator:
14 ] [
2/3MAX
MAX
MIN
(on/off)
(unit of measurement)
(backlight)
(freeze value)
(automatic power-off)
(low battery level)
(freeze value active)
(settings)
(average values)
(two-thirds of max . values)
(max . values)
(min . values)
GB 7