Texas Instruments TI-NSPIRE Software Manual page 87

Tool name
Show (Hide) Scale
Add Function Table
Graphing Type Menu Tools
Tool name
Function
Parametric
Polar
Scatter Plot
Window Menu Tools
Tool name
Window Settings
Using Graphs & Geometry
Tool function
Toggles between showing and hiding the
scale legend on the work area. When the
scale is shown, the value and/or units can
be changed to desired values/units. This
applies only to geometric constructions.
Launches the Lists & Spreadsheet
function table. When launched from
Graphs & Geometry, it is pre-populated
with all functions defined in the problem
with the exception of hidden functions.
More information on using Function
Tables is available in the Lists &
Spreadsheet chapter of this document.
Tool function
Displays the function mode entry line at
the bottom of the work area.
Displays the parametric mode entry line
at the bottom of the work area. This
display shows the t-min, t-max, and t-step
values. The defaults are 0-2p for t-min, t-
max, and p/24 for t-step.
Displays the Polar mode entry line at the
bottom of the work area. This display
shows the q-min, q-max, and q-step
values. The defaults are 0-2p for q-min
and q-max, and p/24 for q-step.
Displays the Scatter Plot mode entry line
at the bottom of the work area.
Displays the Window Settings dialog
that enables you to enter the x-min,
x-max, y-min, and y-max values for
the axes.
Tool function
75