Changing The Animation Of A Point In Motion; Pausing And Resuming Animation; Resetting Animation; Stopping Animation - Texas Instruments TI-NSPIRE Software Manual

Changing the animation of a point in motion

To change the speed of a point's movement or the direction of
animation:
1. Reset or pause the animation.
a) Select the Attributes tool (
b) Select the point you want to change.
c) When the attribute bar displays, select the animation
attribute (
2. To change the speed, type a new velocity number.
To change the direction of animation, press 78 to select the desired
3.
direction.
4. Press the Start
The point moves at the new speed and/or in the new direction you
selected.

Pausing and resuming animation

To pause the animation on a page, select the Pause
To restart animation, select the Start

Resetting animation

Selecting the Reset
the animated point to its initial coordinate position on the object when
animation was first started. If multiple points are animated on the page,
all are returned to their original locations when you select Reset.

Stopping animation

To stop the animation of an object:
1. Select the Pause
2. Display the Animation attribute for the point.
3. Change the speed to 0 (zero).
4. Click an empty area of the screen to apply the change, or press
.
Enter
5. Select Start
temporarily stopped.
166
).
button.
button not only pauses animation but also returns
or Reset
to resume animation if other animated points were
).
button.
button on the control bar.
Using Graphs & Geometry
button.