Moving About The Work Area - Texas Instruments TI-NSPIRE Software Manual

b) To adjust the scale and tic mark spacing on a single axis,
press and hold Shift, and then grab and drag a tic mark on
that axis.
5. Adjust the location of the axes. To move the existing axes without
resizing or rescaling them, click in and drag an empty region of the
screen until the axes are in the desired location.
6. Use the Window Setting tool (
y-min, and trace step values for the axes. When selected, this tool
opens a dialog that enables you to enter the values desired. The
current values are initially displayed. Type over them to enter new
values.
Window Settings dialog with initial values displayed
You can hide and redisplay axes using the Hide/Show Axes tool.
From the View menu, select the Hide/Show Axes tool (
• If the axes are shown on the page, selecting this tool hides them.
• If the axes are hidden on the page, selecting this tool redisplays
them.

Moving about the work area

Graphs of functions may extend beyond the visible portion of your
screen. This does not mean they are truncated. You can view them by
panning the screen. To pan the screen:
1. Click and hold the mouse button in an open area of the page.
2. Move to display different portions of the screen.
Using Graphs & Geometry
) to define the x-max, x-min, y-max,
).
89