Transferring A Numerical Text Entry To An Axis - Texas Instruments TI-NSPIRE Software Manual

a) To create a circle, select the Circle tool (
to the work area, the circle immediately appears. Its radius is
the transferred measurement.
b) Click to anchor the circle on the work area.
4. If you are transferring a measurement to a line, ray or vector, click on
the object.
The distance between the two defined points is the transferred
measurement.
Note: If you adjust the length of the initial measurement, all objects you
create with that measurement are adjusted automatically to reflect the
change.

Transferring a numerical text entry to an axis

1. Using the Text tool (
Using Graphs & Geometry
Ray created from the
transferred measurement
), create the number on the work area.
)When you move
137