Moving Text; Using The Calculate Tool - Texas Instruments TI-NSPIRE Software Manual

If you use the Text tool (
interpreted as numbers by Graphs & Geometry and can be used for
computing or specifying measurements.
4. Click again or press
To exit this mode, select another tool or save your work.

Moving text

1. Select the text with the Pointer tool (
2. Drag it to the new location.
3. Click the text to anchor it in the new position.

Using the Calculate tool

The Calculate tool (
using measured and entered values. An example best shows how this
tool is used.
1. Create an object and display measurements for it. In this example, a
triangle is constructed and its angles are measured.
2. Use the Text tool (
measurements are added.
3. Select the Calculate tool (
146
) to enter numerical values, these are
to anchor the text on the work area.
Enter
) enables you to perform arithmetic calculations
) to write the desired formula. Here, the angle
).
).
Using Graphs & Geometry