Repositioning (Swapping) Applications On A Page; Deleting Pages Or Applications; The Ti-Nspire™ Keypad - Texas Instruments TI-NSPIRE Software Manual

Cas computer software
Hide thumbs Also See for TI-NSPIRE:
Table of Contents

Advertisement

Repositioning (swapping) applications on a page

If you want to change the position of applications on a page with
multiple applications, you can do so by "swapping" the positions of two
applications.
1.
Select Swap Application from the Edit menu.
Note: The last active application you worked on is automatically
selected as the first application to be swapped.
2.
Click on the second application to be swapped. The swap is done
when the second application is selected.
Note: When there are only two work areas, the selected application
automatically swaps position with the other application on the work
area.
To cancel a swap, press Esc. Press Ctrl Tab to cancel the swap and shift
focus to the next app in the page layout.

Deleting pages or applications

You can delete an entire page or remove an application from a work
area using the delete tools on the tool bar.
Deleting a page
1.
Select the page you want to delete.
2.
Select
Edit >Delete
Deleting an application from a page
1.
Click the application you want to delete.
2.
Select either Edit > Select Application or press Ctrl + K.
The selected application blinks on the page.
3.
Click
or select
The TI-Nspire™ Keypad
The TI-Nspireé CAS computer software allows you to display and use a
virtual keypad, which directly mimics the behavior of the handheld
keyboard. Use the keypad to enter expressions and perform calculations
with the desktop software, just as you do with the handheld.
Getting Started
or click the Delete icon,
.
Edit > Delete
.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ti-nspire

Table of Contents