•
Zoom - Data
•
Zoom - Fit
3.
The graph displays in the selected zoom view.
If you select Zoom Box, you must specify the first and third corners of
the box.
If you select either Zoom In or Zoom Out, you must specify the center
point before the graph is redrawn.
4.
To return the graph to its initial state, either select Undo (
select Zoom - Standard from the Zoom menu.
Checking page contents
When creating content on your computer for use on the handheld, select
TI-Nspireé Handheld View from the View menu to see the page as it will
appear on the handheld screen. By using this view, you can adjust the
contents on the page to ensure it displays completely and correctly on
the TI-Nspireé handheld screen.
The entry line
The Entry line appears at the bottom of the Graphs & Geometry work
area. When the line is not active, it is grayed out.
94
Using Graphs & Geometry
) or