Maintenance; Troubleshooting - Num'axes Canifugue FUG1030 User Manual

• Carefully check that your collar is operating properly if it has not been used for some
time.
• Before each use check the tightness of the contact points.
• Take care not to store or keep your collar in places exposed to high temperatures, like
the parcel shelf of a car.
• The system activates automatically as soon as the animal crosses the unauthorized zone.
However, despite the product's excellent reliability, it may be set off unintentionally.
• To prevent the collar from going off accidentally, we advise against your dog wearing a
medal or a metallic collar around his neck.
• The collar should not be worn inside the house.
• The pet fencing system is a virtual boundary; you cannot consider it as a solid, foolproof
barrier for all dogs.

Maintenance


Do not use volatile products such as thinner or benzine to clean your CANIFUGUE. Wash the
receiver regularly with clean water. Wipe it dry with a soft cloth.
To maintain its watertightness, you are strongly advised to change the collar seal once a year.

Troubleshooting


• Before blaming a problem on your appliance, please read this guide carefully again and
make sure it is not due to a low-powered battery or incorrect use.
• Check that the collar is properly adjusted around the animal's neck; make sure the contact
points are in contact with his skin. If necessary, replace the short contact points with the
longer ones.
• Check the tightness of the contact points.
• Check the condition of the battery.
• Check the transmitter power supply (when the transmitter is on, the green indicator light
is on).
• As time passes by, in case you face some problems with the detection distances, check
the condition of the wires and of the connections (oxidation).
Canifugue FUG1030 Guide_Indice I.indd 30
Gb - 30
28/06/2018 14:49