Heat & Glo PIER-36TR-IFT Installation Manual page 58

FINISHING
MATERIAL
DOOR
37-1/2 in.
(Includes 1/4 in. opening each side of door)
(Inside door height)
37 in.
(Outside door width)
37-1/2 in.
(Includes 1/4 in. opening each side of door)
Finishing materials over 1 inch thick.
Figure 10.10 Inside Fit Decorative Front
FINISHING
MATERIAL
*IF FINISHING MATERIAL IS THICKER THAN
2 IN., DOORS WILL ONLY OPEN
AS FAR AS PICTURED
Finishing material between 1 and 2 inches thick.
Figure 10.11 Operable Hinge Decorative Front
58
Heat & Glo • ST-36TR-IFT, PIER-36TR-IFT Installation Manual • 2482-980 Rev. D • 3/19
FINISHING
MATERIAL
37 in.
(Outside door width)
33-3/4 in.
34-1/2 in.
FINISHING
MATERIAL
DOORS
37-1/2 IN.
*
34-1/2 in.
*
When using a Folio decorative front, finish up to the
appliance opening for best results.
Figure 10.12 Pier Decorative front Finishing
FINISHING
MATERIAL
*
38-1/4 in.