Table of Contents
Advertisement
E. Disassemble Vent Sections
• Rotate either section (see Figure 7.10) so the seams on
both pipe sections are aligned as shown in Figure 7.11.
• Pull carefully to separate the pieces of pipe.
Figure 7.10 Rotate Seams for Disassembly
Figure 7.11 Align and Disassemble Vent Sections
44
Heat & Glo • ST-36TR-IFT, PIER-36TR-IFT Installation Manual • 2482-980 Rev. D • 3/19
Advertisement
Table of Contents
