Technical Parameters; Basic Parameters - Advantech SmartFlex SR310 User Manual

7. Technical Parameters

7.1 Basic parameters

SmartFlex Router
Temperature range
Cold start
Humidity
Altitude
Degree of protection
Supply voltage
Battery for RTC
Consumption
Dimensions
Weight
Antenna connectors
User interface
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
Operating -40 C to +70 C (-40 F to +158 F)
Storage -40 C to +85 C (-40 F to +185 F)
-15 C Data transfers via mobile network are available
immediately
-20 C Data transfers via mobile network are available
approximately in five minutes after the start of
the router. Everything else is functional imme-
diately.
Operating 0 to 95 % relative humidity non condensing
Storage 0 to 95 % relative humidity non condensing
Operating 2000 m / 70 kPa
IP30
10 to 60 V DC
CR1225
Idle 2.5 W
Average 4 W
Peak 11 W
Sleep mode 10 mW
55 x 97 x 125 mm (2.17" x 3.82" x 4.92")
(DIN 35 mm, EN 60715)
Plastic box approximately 170 g (0.37 lbs)
(depends on interface)
Metal box approximately 380 g (0,83 lbs)
(depends on interface)
2x SMA – 50
1x R-SMA – 50
2x ETH Ethernet (10/100 Mbps)
USB USB 2.0
I/O 6-pin panel socket
Micro SD SDHC, SDXC
Table 32: Basic parameters
44
SmartFlex SR310
(je-li osazen WiFi modul)