I/O Port; O Connector; Connection Of I/O Port; Characteristics Of Inputs - Advantech SmartFlex SR310 User Manual

5.9.11 I/O Port

Panel socket 6-pin.
The I/O user Interface is designed for the processing of binary input and control (setting)
of binary output. Binary output is open in the default configuration. The isolation strength is
1.5 kV. The pins are isolated from each other with the same strength.
The input circuits are bipolar and allow connection as needed with common plus or minus
(according to the connection of an external voltage).
Binary inputs

• Characteristics of inputs:

Logical 0 / 1
log. 1 max
log. 0 min
log. 0 type
log. 0 max
The binary input status in the Shell is returned via io get bin0 or io get bin1 .
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
Pin Signal mark
1 IN0
2 IN0
3 IN1
4 IN1
5 OUT
6 OUT
Table 18: Connection of I/O port
Figure 39: I/O connector
Voltage
3 V
5 V
12 V
60 V
Table 19: Characteristics of inputs
SmartFlex SR310
Description
Binary input 0
Binary input 0
Binary input 1
Binary input 1
Binary output
Binary output
Current Web interface status
0.4 mA Off
0.7 mA On
2 mA On
7 mA On
30