Advantech SmartFlex SR310 User Manual page 27

Low Power Mode
In applications requiring low power consumption (such as solar power - not 7/24 mode)
is strictly recommended to use LPM mode prior to powering down the entire router.
LPM (Low Power Mode) is a router mode where the router is in sleep mode with minimal
power consumption. The router can be woken up from this mode by a signal applied to the
BIN1 input or after a predetermined period of time. Putting the router into LPM mode can be
done using the lpm command, see
Consumption in LPM mode may vary depending on the configuration of the router.
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
SmartFlex SR310
Commands and Scripts
20
application note for more details.