Endress+Hauser Flowphant T DTT31 Operating Instructions Manual page 20

Operation
5.1.8 Setting for service functions
Function Function
group
Service
functions
Switch output
version
Analog output
version (4 to
20 mA)
20
Set-
tings
Locking
code
Change
locking
code
Reset
Static
revision
counter
Device
status
Last error
Simula-
tion for 2
x switch
output
Simula-
tion for 1
x analog
output
(SIMA)
and 1 x
switch
output ...
(SIM)
Description
Enter the device locking code.
User-defined code 1 to 9999;
0 = no locking;
Only visible if the locking code is valid.
Reset all entries to factory settings.
Configuration counter, incremented each time
the configuration is changed.
Display of last error to occur.
OFF: no simulation
OPEN: switch output open
CLOS: switch output closed
OFF: no simulation
OPEN: switch output open
CLOS: switch output closed
3.5, 4, 8...:
Simulation values for analog output in mA
(3.5/4.0/8.0/12.0/16.0/20.0/21.7)
DTT31, DTT35
Endress+Hauser