Endress+Hauser Flowphant T DTT31 Operating Instructions Manual page 19

DTT31, DTT35
Function Function
group
contin-
ued
Endress+Hauser
Set-
tings
Switch-
back point
value
Switch
point delay
Description
• Enter value 0 to 95% in increments of 1%.
Factory setting: 40%
!
Note!
The value has to be at least 5% smaller than the
switch point SP.
or:
• Enter value -20 to 80 °C (-4 to 176 °F) in
increments of 1 °C (1 °F) if the switching mode
MODE is set to temperature TEMP.
Factory setting: 50 °C
!
Note!
Value has to be at least 5 °C (9 °F) smaller than
switch point SP2.
Can be set anywhere between 0 and 99 s in
increments of 1 second.
Factory setting: 0 s
Operation
19