Installation Guide
MHM-97883
1
General
1.1
Using this manual
This manual contains information concerning the proper and correct use of the device.
Read the installation guide completely prior to starting installation and operating the
device. Comply with all safety instructions.
Include the installation guide when transferring the device to third parties.
Note
When requesting technical support, please indicate type and serial number from the type
plate and the used converter type.
Table 1-1
Table 1-1: Referenced documents
MHM-97884
MHM-97879
MHM-97873
MHM-97442
1.2
Symbols
Note
This symbol marks passages that contain important information.
CAUTION
This symbol marks operations that can lead to malfunctions or faulty measurements, but
will not damage the device.
DANGER
A danger indicates actions that can lead to property damage or personal injury.
1.3
Liability and guarantee
Emerson is not liable for damages that occur due to improper use. Proper use also includes
the knowledge of, and compliance with, this document.
MHM-97883, Rev 1.07
shows a list of documents that are referred to in this installation guide.
Operating manual AMS EZ 1000 Converter for
Eddy Current Sensors
Operating manual Machine Studio - General
Functions
Operating manual A6500-UM Universal
Measurement Card
Operating manual AMS 6300 SIS, Overspeed
Protection System
General
June 2023
5