Table of Contents
Advertisement
1. GENERAL WARNING
Symbol
warns the user about the presence of non-insulated "dangerous voltage" inside the product
area, which may cause electric shock.
Symbol
instructions found in the documentation attached to the device.
Dixell Srl reserves the right to modify this manual without prior notice. The documentation can be downloaded
from www.dixell.com even prior to purchase.
This manual forms part of the product and must always be kept near the device for easy and quick reference.
The device cannot be used as a safety device. Verify the limits of application before using the device.
Verify that the power supply voltage is correct before connecting the device. Do not expose it to water or
humidity. Use the controller only within the operating limits, avoiding sudden temperature changes and high
atmospheric humidity, which may result in the formation of condensate. Warning: disconnect all the electric
connections before performing maintenance. The device must not be opened.
The customer shall bear full responsibility and risk for product configuration in order to achieve the results
pertaining to installation and/or final equipment/system.
Upon the customer's request and following a specific agreement, Dixell s.r.l. may be present during the start-
up of the final machine/application, as a consultant, however, under no circumstances can the company be
held responsible for the correct operation of the final equipment/system.
Since
Dixell
qualification/configuration/programming/commissioning stage is required to use them as best as possible.
Otherwise, these products may malfunction and Dixell cannot be held responsible. The product must not be
used in any way that differs from that stipulated in the documentation.
The device must never be hand-held while being used.
It is good practice to bear the following in mind for all Dixell products:
•
Prevent the electronic circuits from getting wet as contact made with water, humidity or any other type of
liquid can damage them. Comply with the temperature and humidity limits specified in the manual in order
to store the product correctly.
•
The device must not be installed in particularly hot environments as high temperatures can damage it
(electronic circuits and/or plastic components forming part of the casing). Comply with the temperature
and humidity limits specified in the manual in order to store the product correctly.
•
Prevent the device from being dropped, knocked or shaken as either can cause irreparable damage.
•
Do not clean the device with corrosive chemical products, solvents or aggressive detergents.
•
The device must not be used in applications that differ from that specified in the following material.
Dixell Srl reserves the right to vary the composition of its products without prior notice to the customer,
ensuring the identical and unchanged features of the same.
1592038710 Gas Leak Detector Modbus GB 01.12.2016
warns the user about the presence of important operating and maintenance (assistance)
products
form
part
of
a
very
high
GDS41M-GDS66M-GDI41M-GDI66M
level
of
technology,
a
3/28
Advertisement
Table of Contents
