Page 2
E N G the i acci Manufacturer Date of Manufacture YYYY-MM-DD Use-by (Expiry date) YYYY-MM-DD LOT number 7 Unw begi care Reference / model number Sterilized using ethylene oxide Global Trade Item Number Do not use if package is damaged need care fully...
Do not re-insert the introducer needle into inset™ is a single use device and should be ■ ■ CONTRAINDICATIONS the infusion set. This could cause a tearing disposed of immediately after use.
STORAGE & DISPOSAL containing alcohol or disinfectants in contact RECOMMENDATIONS with the connector or the tubing. These may Store inset™ in a cool, dry location at room Check your blood glucose level one to three ■ ■ impact the integrity of the infusion set.
- Preparation and insertion ™ 1 Wash your hands before inserting the Read all instructions carefully before using the inset™. For information about pump therapy, possible infusion set. errors, and potential risks and their causes, consult your pump manufacturer’s instructions for use before 2 Suggested insertion sites.
Page 7
Now needle. infusion set. Hold the adhesive tape in place unwind the tubing from the serter by pulling it CAUTION: Before positioning inset over a by placing a finger just in front of the cannula carefully upwards.
Page 11
11 Hughes Irvine, CA 92618, USA www.betabionics.com Infu Inst Unomedical a/s - A ConvaTec Company Aaholmvej 1-3 Osted 4320 Lejre Denmark www.infusion-set.com Made in Mexico...
Need help?
Do you have a question about the Inset and is the answer not in the manual?
Questions and answers