ConvaTec Natura Quick Start Manual

Natura Accordion Flange with
™
ConvaTec Moldable Technology
1
Accordion Flange application
There is a clear release liner on back of
skin barrier: DO NOT REMOVE YET.
Roll and mold the moldable adhesive to
the size of the stoma. Do not stretch,
pull or cut. Pinch into place once
desired size is reached.
2
Applying pouch
Separate the sides of the pouch to
allow some air to enter the pouch.
Refer to package insert for complete instructions.
Remove release liner and center
the opening over the stoma
and apply to clean, dry skin.
PULL UP accordion flange and
hold it with thumbs on top and
fingers underneath. Line up
flanges of pouch and skin barrier.
™
Place accordion flange on body.
Push the rolled adhesive toward
to stoma to ensure a close fit.
Remove the white release paper
from the tape collar and press
against the skin. Smooth tape
collar and hold skin barrier in
place for about 30 seconds.
Start at bottom and apply
pressure completely around
the flanges until the pouch
and flange are snapped
completely together.