ConvaTec SUR-FIT Natura How To Use

ow to use the
SUR-FIT Natura ®
(including convex skin barriers)
Composition of
SUR-FIT Natura
®
Moldable Technology
Skin Barrier
Applying Skin Barrier
BEFORE APPLICATION
Hands and peristomal skin should be clean, dry and free of any solvent or greasy substances before you
begin applying the skin barrier.
STEP 1 | SIZING
[
Hold the skin barrier in front of your stoma with the flange ring
A
side up.
[
Use the clear cover backing on the adhesive as a window to view
B
the size and shape of the stoma.
NOTE: THIS IS A MOLDABLE PRODUCT.
DO NOT CUT!
STEP 2 | MOLDING
[
To personalize the stoma opening, place your fingers at the edge of
A
the starter hole and begin to roll back the adhesive to the size and
shape of your stoma.
As you roll the adhesive back on itself, look through the clear
cover backing window to ensure the hole you are creating fits the
size and shape of your stoma.
[
B Once you have rolled the adhesive back to the size and shape of
your stoma, remove the clear cover backing from the skin barrier.
[
C Center the opening over your stoma and press the skin barrier onto
your skin.
Moldable Technology Skin Barrier
Starter Hole
Adhesive
Flange Ring
Tape Border
FRONT
BACK
Clear Cover
Backing
White Release
Paper
[ ]
[ B ]
[ ]
[ B ]
[ C ]