ConvaTec Esteem + Manual

Esteem
®
ConvaTec Mouldable Technology
1

Mouldable Disc application

Mouldable disc & pouch come
1. In the Box
attached.
Roll and mould the disc to the size of the
3. Remove liner 1.
isk from the pouch.
3. Remove liner 1.
4. Molding.
4. Check the size of the molding.
stoma. Do not stretch, pull or cut. Pinch
into place once desired size is reached.
2. Remove the moldable disk from the pouch. 2. Remove the moldable disk from the pouch.
x
7. Place the disk on the body.
7. Place the disk on the body.
8. Remove liner 3.
Place the disk on the body. Push the roll
9. Make place for the stoma.
of adhesive toward the stoma to ensure
a close fit. Skin should be clean and dry.
2
olding.
e size of the molding. 6. Remove liner 2. 6. Remove liner 2.

Applying pouch to the Mouldable Disc

11. Place the pouch on the body - 1.
11. Place the pouch on the body - 1.
12. Place the pouch on the body - 2.
ma. 10. Remove liner 4. 10. Remove liner 4.
ce for the stoma.
Remove pouch release liner.
Refer to package insert for complete instructions.
+ One-Piece Pouch with
1. In the Box
2. Remove the moldable disk from the pouch.
1. In the Box
4. Check the size of the molding.
4. Molding.
4. Molding.
6. Remove liner 2.
4. Check the size of the molding.
3. Remove liner 1. 3. Remove liner 1.
2. Remove the moldable disk from the pouch.
8. Remove liner 3.
9. Make place for the stoma.
8. Remove liner 3.
10. Remove liner 4.
9. Make place for the stoma.
7. Place the disk on the body. 7. Place the disk on the body.
6. Remove liner 2.
12. Place the pouch on the body - 2.
11. Place the pouch on the body - 1. 11. Place the pouch on the body - 1.
10. Remove liner 4.
1. In the Box
Remove mouldable disc from the
3. Remove liner 1.
2. Remove the moldable disk from the pouch.
pouch.
Check the size of the moulding.
4. Check the size of the molding.
7. Place the disk on the body.
6. Remove liner 2.
4. Molding.
3. Remove liner 1.
9. Make place for the stoma.
Remove liner marked #3.
11. Place the pouch on the body - 1.
10. Remove liner 4.
8. Remove liner 3.
7. Place the disk on the body.
12. Place the pouch on the body - 2.
12. Place the pouch on the body - 2.
Place pouch on the mouldable disc 11. Place the pouch on the body - 1.
™
2. Remove the moldable disk from the pouch.
2. Remove the moldable disk from the pouch.
1. In the Box
Remove liner marked #1. This is 4. Molding.
3. Remove liner 1.
the moulding side.
Remove liner marked #2.
6. Remove liner 2.
6. Remove liner 2.
4. Check the size of the molding.
8. Remove liner 3.
This side will go on the skin.
7. Place the disk on the body.
4. Molding.
4. Molding.
10. Remove liner 4.
10. Remove liner 4.
9. Make place for the stoma.
Separate the sides of the
12. Place the pouch on the body - 2.
11. Place the pouch on the body - 1.
pouch to allow some air to
enter the pouch.
8. Remove liner 3.
8. Remove liner 3.
12. Place the pouch on the body - 2.
12. Place the pouch on the body - 2. Smooth/hold skin barrier in place
for about 30 seconds.
3. Remove liner 1.
3. Remo
2. Remove
4. Mold
7. Place the disk on the bod
7. Place
6. Remov
8. Rem
11. Place the pouch on the
11. Plac
10. Remov
12. Pl