1
2
3
4
Figure 7
1. Bolt (14 x 70 mm)
2. Top mounting plate
3. Nut (14 mm)
4. Frame-mount bracket
3. Remove the top mounting plate by removing the 4
bolts (14 x 60 mm) and 1 bolt (14 x 70 mm) and 1 nut
(14 mm) that you installed in steps
top mounting plate and fasteners to install later.
4. Ensure that the hub face is parallel with the edge of the
tube on the frame-mount bracket to within 1.6 mm
(1/16 inch); note the dimension "X" on either side of
the hub in
Figure
8.
5
6
g037910
5. Bolt (14 x 55 mm)
6. Bolt (14 x 30 mm)
7. Bolt (14 x 30 mm)
8. Bolt (14 x 55 mm)
1
and 2. Retain the
1
X
Bottom View of Hub
1. Hub face
5. Torque the 2 bolts (14 x 55 mm) and 2 bolts (14 x 30
mm) to 135 to 165 N∙m (100 to 120 ft-lb).
Installing the Top Mounting Bracket
1. Insert the mounting-plate shims (16 gauge and 26
gauge) as needed to fully fill the gap between the top
of frame-mount bracket and the bottom of the top
mounting bracket as shown in
7
g037541
2
Figure 8
2. Edge of the tube on the
frame-mount bracket
Figure
9.
X